Eibach Pro Kit Lowering Springs - 2015 Mustang GT

$245.00

Benefits
•Improved Handling
•Less Wheelwell Gap
•Excellent Ride Quality

Features
•Approx 1.1"-1.0" drop
•Black Finish
•Fits 2015 Mustang GT Only
•Coupe or Convertible

Lowered Ride Height
Get rid of the ugly wheel gap on your S550 with the help of these 2015 Mustang GT Eibach Pro-Kit lowering springs! These springs lower your GT on average by approximately 1.1" in the front and 1.0" in the rear. The Pro-Kit springs feature a specific rate for a firmer ride quality and a moderate increase in spring rate. This kit can be used with factory shocks and struts.

Increased Suspension Performance
Every Eibach Pro-Kit is designed and tested by a suspension engineer and performance driving professional - to offer aggressive good looks and high performance handling - the best of both worlds without compromising safety or ride quality. By using this proprietary, specific rate spring design, the Pro-Kit provides the ultimate balance that will take your passion for driving to a whole new level.

Ride Height Difference
Front: Approx 1.1"
Rear: Approx 1.0"

Spring Rates
Front - 201 lbs
Rear - 800 lbs

Front Specs
OE rate: 28 N/mm (160 lbs/in)
PRO-KIT progressive rate: 35 - 55 N/mm (200 - 314 lbs/in)
Bump-stop: New Eibach Bump Stop
Damper: OE
Tubing: N/A
OE wheel center to fender: 397 mm (15.6 in)
PRO-KIT wheel center to fender: 370 mm (14.5 in)
PRO-KIT can be aligned to OE Specs: Yes

Front Alignment:
OE Camber = -0.8 deg (+/-0.8 deg)
OE Caster = 7.2 deg (+/-0.8 deg)
OE Toe = 0.0 deg (+/-0.2 deg)
PRO-KIT Camber = -1.0 deg
PRO-KIT Caster = 7.5 deg
PRO-KIT Toe = 0.2 deg

Rear Specs
OE rate: 117 N/mm (668 lbs/in)
PRO-KIT progressive rate: 140 - 160 N/mm (800 - 914 lbs/in)
Damper: OE
Bump-stop: New Eibach Bump Stop
Tubing: N/A
OE wheel center to fender: 385 mm (15.1 in)
PRO-KIT wheel center to fender: 360 mm (14.2 in)
PRO-KIT can be aligned to OE specs: Yes

Rear Alignment:
OE Camber = -1.2 (+/-0.8 deg)
OE Toe = 0.1 deg. (+/-0.2 deg)
PRO-KIT Camber = -1.4 deg
PRO-KIT Toe = 0.2 deg

NOTE
PRO-KIT spring rates are measured as a system of the front or rear suspension. 10mm of bump-stop deflection is included in the final rate of the system.


Add to Cart:

  • Model: 35145140

Copyright © 2019 Evolution Performance.